Prism Powder Coating LTD.

General Description of Hybrid

Prism Powder Coatings H-Series Hybrid powders are a combination of Epoxy and Polyester resins designed for a range of both decorative and functional use. The hybrid powders have excellent chemical and mechanical properties combined with outstanding overbake resistance. They can be manufactured in a wide range of colours and glosses and textures.

H-Series Hybrid powders perform well over cold rolled steel, castings, hot rolled steel and aluminum substrates suitably pretreated. They may be applied by corona or tribo charged electrostatic powder guns.

It is possible to achieve film builds of 1 - 1.5 mils, but 2 - 3 mils is the norm.

As always, we recommend you consult your Prism Powder Coatings representative and perform your own physical testing to determine the suitability of a product for your requirements. See health, safety and storage guide for further information.

Typical Uses for Hybrid:

Some applications suitable for H-Series Hybrid powders office and institutional furniture fire extinguishers wire goods tool boxes racking and shelving, electric and electronic cabinetry, store fixtures and displays.

Limitations of Hybrid:

H-Series Hybrid powders should not be used on any products requiring ultra violet light exposure.

Coating Performance of Hybrid:

Hardness	H-3H range
Impact Resistance:	up to 160 in/lb
Salt Spray + Humidity:	Up to 1000 hrs depending on substrate
60° Gloss:	10 - 100
Cross Hatch Adhesion:	100%

Sample test results typical of 2 - 2.5 mils applied to 24 gauge Bonderite 1000 panels.

Typical Cure Cycle for Hybrid


Store Fixtures	Office Furniture	Seating